eSUN 3D Printer bio Resin for LCD 3D Printers,1kg eResin-PLA- Black

This bio-based 3D printing resin has special qualities that make it the ideal all-purpose resin and uses PLA monomers as its primary raw material. Created specifically for LCD/LED light sources to improve printing quality.PLA Resin, is compatible with the majority of 405 nm-wavelength LCD printers. Faster printing speed and 75 shore D toughness

Precautions:

Storage:

1) Maintain sealed and away from light at room temperature.
2) It is advised to keep the resin in its original container between 15 and 35 degrees Celsius.
Avoid being in any dusty or wet areas.

Usage:

1) Thoroughly shake before using. Keep out of any direct sunlight while using.
2) Keep youngsters away from it. Keep out of mouth.
3) Put on gloves before use to prevent skin-to-surface contact and maintain airflow in the space.
4) If unintentionally contacted, please rinse thoroughly with water right away. Consult a doctor if necessary.
5) After completion, models must be cleaned for around 30 seconds with high-concentration alcohol (>95%).